WEBVTT

00:00.000 --> 00:10.000
A Tyroleon finish is a cement based finish
which is applied over rendered masonry usually

00:10.000 --> 00:18.000
It gives a very textured finish as you can see and it gets
everywhere when it's sprayed on so everything needs to be protected

00:18.000 --> 00:23.000
We've rendered this wall, you can see that
on another video patching up rendered walls

00:23.000 --> 00:28.000
And now we're going to Tyroleon
it to match the existing texture

00:28.000 --> 00:34.100
mixture. Tirolean comes in bags of 25 kilograms.
It's supplied by a gun that you can see on the left

00:34.180 --> 00:40.800
that blue thing, and we like to put a tiny bit,
about half a teacup of PVA in the water when we

00:40.800 --> 00:47.680
mix the Tirolean. Tirolean's mixed just the same
as skin plaster, so if you look at our skin

00:47.680 --> 00:52.800
plastering video, you can see more about mixing,
but the water's placed in the bucket, the Tirolean

00:52.800 --> 01:00.840
powder is tipped in and it's mixed with
a whisk on the end of an electric drill

01:00.840 --> 01:06.880
When it's mixed, it's wet enough
to either pour or scoop into your

01:06.880 --> 01:19.900
Tyrolean gun and when we start spraying you see how the gun works It sits in the bottom of the
container and you can see those little prongs They are flicked when the handle is turned and it

01:19.900 --> 01:25.000
sprays the Tyrolean on the wall giving you a
textured finish. You'll see in a bit how that

01:25.000 --> 01:31.840
spray action can be adjusted. You move up and
down the wall and keep spraying and keep an eye

01:31.840 --> 01:43.180
on the surface, the existing surface that you're spraying up to, so that
you can adjust the flicking action to get the right sized blobs of Tyrolean

01:44.400 --> 01:49.600
The gun in the top right hand corner shows you
how the prongs flick the Tyrolean iron wall

01:49.600 --> 01:57.660
and they can be adjusted by the lever on the side so
that you can get a slower action giving you bigger blobs

01:57.660 --> 02:14.840
or a faster action giving you smaller ones. Just fill in all the spaces and when you've finished you should have
blended into your existing surface and from that point on you can paint the Tyrolean to match the existing house