How To Maintain Calcium Battery? .
Regular maintenance of the calcium battery will prolong its lifetime and
you will get the best out of the battery.
Regular inspection and testing of the battery will ensure that
it is in good working condition.
These include keeping it clean, checking electrolyte levels regularly, proper
charging, avoiding deep discharge of the battery, proper storage, use of the right
charger, and float charging the battery.
Here are some of the routine steps that will help maintain calcium batteries.
1.
Keep The Battery Clean .
One of the most important things you can do to keep your calcium batteryrunning
optimally is to keep it clean.
When dirt and dust build up on the battery, they form a non-conductive layer
that will inhibit the flow of current.
This will cause the battery to lose power, so it’s important to make sure
everything is clean and free of debris.
Dirt on the battery will enhance the process of corrosion in presence of
moisture thus reducing the battery life.
Use a dump cloth to wipe out dirt and dust and keep the battery top clean.
2.
Check The Electrolyte Levels Regularly.
If the calcium battery is the flooded type, you need to keep an eye on the electrolyte.
The battery electrolyte provides a medium in which chemical reactions take place.
When the electrolyte levels fall below a certain level, it will inhibit the reactions
thus lowering the battery capacity.
Always ensure all the battery plates are covered in battery acid.
But remember do not overfill the battery with acid.
During charging, the escaping gases cause the battery to appear like boiling over
and if the electrolyte is overfilled, it will spill over and cause damage.
When the electrolyte levels are noticeably low where the cell plates are exposed, add
battery water and do not add concentrated sulfuric acid into the battery.
3.
Do Not Overcharge The Calcium Battery.
Overcharging the battery will cause permanent damage to the battery.
Such a battery will have a reduced lifetime and will not provide
adequate power when needed.
Overcharging the battery causes the internal resistance of the battery to increase.
The increased internal r4esistance causes temperatures inside the battery
to raise which in turn causes the resistance to become even higher.
This chain reaction will cause the battery to experience a thermal
runway where it will melt or explode due to extremely high temperatures.
Use smart chargers such as CTEK MXS 5.0, NOCO Genius 10, Noco Genius 5, Schumacher
Fully Automatic Battery Charger, and Battery Tender 4 AMPare suitable to ensure
the calcium battery is not overcharged.
4.
Avoid Deep Discharge Cycles.
Deep discharging the battery means discharging the battery
below the recommended levels.
Most flooded lead acid batteries will endure discharges of up
to 20% of their rated capacity.
AGM batteries will endure discharges of up to 50% while lithium batteries will
undergo up to 80% discharge levels.
When the battery is deeply discharged beyond its capacity, it will
suffer permanent damage internally.
Always ensure the battery is kept fully charged when not in use.
This can be achieved by the use of float chargers which will prevent
the battery from deeply discharging.
Use the right battery for the right load.
5.
Use A High-Quality Charger.
When it comes to calcium batteries, it is importantto use a high-quality charger.
This will ensure that your battery receives the correct amount of
charge and is kept in good condition.
There are a few different types of chargers available, so it is important
to choose the right one for your battery.
Smart chargers such as NOCOGenius 10, NOCO Genius 5, Schumacher charger,
CTEK MXS, Clore Automotive Pro-logic charger, and Lifepo4 charger that
comes with temperature compensation.
They are highly recommended for charging calcium batteries as
they ensure the battery is not overcharged and damaged in the process.
It is also important to choose the right voltage for your battery.
Most batteriesare designed to be charged at a certain voltage, but there are some that
can be charged at a higher or lower voltage.
It is important to read the instructions that come with the battery before charging it.
6.
Store The Battery In A Cool, Dry Place.
When storing your calcium battery, keep it cool and dryto prolong its life.
Avoid storing it in a hot or humid environment, as this can damage the battery.
Additionally, do not store your battery in direct sunlight and other direct heat
sources as this can cause it to overheat.
High humidity levels will cause the battery to start corroding
thus reducing its lifetime.
Ensure also the battery is stored while fully charged.
You can connect a float charger to always keep the battery fully charged.
In storage, the battery will lose charge to self-discharge.
This is usually at a rate of 3% per month for a flooded battery and around
1% per month for an AGM battery.
Final Thoughts.
Calcium batteries have low self-discharge rates, which means they can be stored for
long periods without losing their charge.
The maintenance of this type of battery needs to be routine and regular to
ensure that the life span is prolonged.
The battery needs to be kept clean and dry at all times.
It should also not be exposed to high temperatures as this can cause damage
and reduce its lifespan significantly. .